Our last REs at Shop:
We create 32 Rack Extensions
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
READ OPERATIONAL MANUAL [PDF]
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
![“BOSS DD-200 Digital Delay pedal Editor” based on Reason Combinator 2.0 patch.
Based on the MIDI OUT DEVICE (stock Reason device).
For using it, select actual Midi output device into the DEVICES mode.
BOSS DD-200 include Midi I/O ports as 1/8″.
To connect midi ports please use Type-A midi cable or BOSS BMIDI5-35.
SETUP:
Patch already use default settings of the pedal. But in work you can make some tricks.
– Open pedal settings: press at once [TAP DIVISION] + [HOLD] buttons
– Scroll knob “TIME” and select parameters to enter needed settings
– rCh: set Midi Channel number to receive CC data
– Pin: set to ON
– CCin: set to ON
– Pot: set to
– Syn: set to Auto
– rTS: set to Nid
VARIABLE SETTINGS: Only one of this function is work for C1F and C2F:
– C1F: select for C2 patch with what type of Button/Knob to work: WARP or TAP or ROLL
– C2F: select for C2 patch with what type of Button/Knob to work: HOLD or TWIST or ROLL
https://turn2on.com/combinators/
#boss #roland #dd200 #dd-200 #digital #delay #pedal #editor #panel #contoller #midi #reason12 #reasonstudios #turn2on #patch #combinator #reason @reasonstudios](https://scontent-frx5-1.cdninstagram.com/v/t51.29350-15/241265379_1510024996017992_5717847460249383899_n.jpg?_nc_cat=105&ccb=1-5&_nc_sid=8ae9d6&_nc_ohc=xIRElmz6vmgAX82ki1R&_nc_ht=scontent-frx5-1.cdninstagram.com&edm=ANo9K5cEAAAA&oh=454410682610a3a93ca3f48be667ab2f&oe=617A7851)
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms
WTFM
Wavetable FM Synthesizer-
4 Op, 24 Algorithms, WT / FM engine
-
450+ Wavetables (30.000+ waves)
-
3 Synthesis modes
WTFM is not an FM synthesizer in the traditional sense. Rather it is a hybrid synthesizer which uses the flexibility of Wavetables in combination with FM synthesizer Operators.
WTFM Wavetable FM Synthesizer produces complex harmonics by modulating the various selectable WT waveforms of the oscillators using further oscillators (operators).
Imagine the flexibility of the FM Operators using this method. Wavetables are a powerful way to make FM synthesis much more interesting.
WTFM is based on the classical Amp, Pitch and Filter Envelopes with AHDSR settings. PRE and POST filters include classical HP/BP/LP modes. 6 FXs (Vocoder / EQ Band / Chorus / Delay / Reverb) plus a Limiter which adds total control for the signal and colours of the Wavetable FM synthesis.
Operators Include 450+ Wavetables (each 64 singlecycle waveforms) all sorted into individual Categories.
The synthesizer includes a basic Modulation matrix for the main settings, special FX mod matrix, and also individual modulation routings to the various synthesizer elements.
WTFM includes 5 special modes:
Traditional Wavetable (WT) synthesis. 4 oscillators, each including 450+ Wavetables sorted into categories.
Classical 4-OP FM synthesis: each operator use 450+ Wavetables to modulate other operators in various routing variations of 24 FM Algorithms.
FM WT MOD SYNTHESIS: The selected Wavetable modulates the frequency of the FM Operators (Tune / Ratio).
RINGMOD Synthesis: The selected Wavetable modulates the Levels of the FM Operators similarly to a RingMod
FILTER FM Synthesis: The selected Wavetable modulates the Filter Frequency of the synthesizer.
This is a modern FM synthesizer with easy to program traditional AHDSR envelopes, four LFO lines, powerful modulations, internal effects, 24 FM algorithms. Based on the internal wavetable’s library with rich waveform content: 32 categories, 450+ wavetables (each with 64 single-cycle waveforms), up to 30,000 waveforms in all.
Classical oldschool FM synthesizers give control of the Operator Levels and Ratio as a main function. WTFM additionaly works with the Operators, morphing waveforms of the selected wavetable. The era of oldschool FM synthesis is now moving to the future.
Should you wish however, you can of course go back to its origins using the included classical waveforms